Early MCX Viper (with stock oil separator drain only))

Close up view of the lengthen MCX breather tube.

« Back to Album Photo 4 of 4 Previous | Next
Close up view of the lengthen MCX breather tube.
Shown in the Blue square is where Andy lengthen the MCX tube. A short length of aluminum tubing from the original stock tubing was used. Then the two pieces are connected together using 5/8" fuel/vapor hose. Fuel/vapor hose is resistant to swelling when exposed to oil and can be found at most larger auto parts stores. The Pink arrow indicates where zip ties are use to secure the breather tube in place. Special thanks to Andy for the pic's!!
Posted by ★ Owner on January 1, 2015 Full Size| Slideshow

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

0 Comments